Network Device Monitoring

Monitor Routers, Switches &
Firewalls With SNMP

StatusEagle monitors your network devices using ICMP ping for reachability and SNMP for deep hardware metrics. Track CPU load, memory usage, and online status for Cisco, Juniper, MikroTik, Fortinet, and generic SNMP devices.

Start Free — 10 Monitors Free View Pricing →

ICMP Ping + SNMP Polling in One Monitor

  • ICMP ping for online/offline status

    Every check sends an ICMP ping to your device's IP address and measures round-trip latency. Instant alerting when a device stops responding.

  • SNMP polling for CPU and memory metrics

    Enable SNMP to pull real-time CPU usage and memory usage directly from your device. Set thresholds and get alerted when resources are under pressure.

  • Vendor-specific SNMP OIDs

    StatusEagle uses the correct OIDs for each vendor — Cisco, Juniper, MikroTik, and Fortinet. Select your vendor and we handle the rest automatically.

  • SNMP v1, v2c, and v3 support

    Works with all SNMP versions. Configure your community string for v1/v2c, or set up SNMPv3 with username, auth password, and privacy password for secure polling.

  • Device type classification

    Label each device as a router, switch, firewall, access point, or server so your dashboard stays organised as your infrastructure grows.

  • Multi-channel alerts

    Get notified via email, SMS, Slack, Telegram, or webhook when a device goes offline or CPU/memory thresholds are breached.

Live Network Monitor Example

core-router-01 Cisco · Router
Online
IP Address 192.168.1.1
Latency 4ms
CPU Usage 18%
Memory Usage 62%
SNMP Available (v2c)
Last Check 42 sec ago

CPU Usage — Last 60 minutes

Within normal range — no threshold breached

Supported Vendors & Device Types

StatusEagle supports vendor-specific SNMP OIDs for accurate CPU and memory readings across all major network hardware brands.

Cisco

Routers, switches, and ASA firewalls. Uses Cisco-specific OIDs for precise CPU and memory metrics from IOS and NX-OS devices.

Juniper

EX switches, SRX firewalls, and MX routers. Polls Juniper enterprise MIBs for routing engine CPU and memory stats.

MikroTik

RouterOS devices including CCR, RB, and hAP series. Reads MikroTik-specific OIDs for accurate CPU and total/free memory reporting.

Fortinet

FortiGate firewalls and FortiSwitch devices. Uses FortiNet enterprise MIBs for CPU processor load and memory usage metrics.

Generic SNMP

Any SNMP-capable device. StatusEagle probes standard HOST-RESOURCES-MIB and UCD-SNMP-MIB OIDs, with automatic fallback to find the right metrics.

Servers & Hosts

Linux and Windows servers with SNMP enabled. Monitor application servers, database hosts, and virtualisation hypervisors alongside your network gear.

Set Up Network Monitoring in Minutes

1

Add your device

Enter the IP address of your router, switch, firewall, or server. Select the device type and your preferred check interval.

2

Configure SNMP (optional)

Enable SNMP, select your vendor, choose v1/v2c or v3, and enter your community string or credentials. Set CPU and memory alert thresholds.

3

Get alerted instantly

Receive alerts when the device goes offline, latency spikes, or CPU/memory breaches your defined threshold — via email, Slack, Telegram, or webhook.

Metrics Collected on Every Check

Online
Reachability

ICMP ping confirms whether the device is online or offline

RTT
Latency

Round-trip time in milliseconds measured per check

CPU%
CPU Usage

Processor load polled via SNMP with configurable alert threshold

MEM%
Memory Usage

Memory utilisation polled via SNMP with configurable alert threshold

Other Monitoring Types

Ping

Port

Cron Jobs

Keyword

Website / HTTP

SSL Certificate

Start Monitoring Your Network Devices for Free

10 monitors free. No credit card required. SNMP setup takes under 2 minutes.

Get Started Free See all features →